|
|
Suppliers Directory
|
J V CORPORATION
| | Address : |
VINOD-VILLA, MAHALAXMI CHAR RASTA BEHIND KRUSHNANAND COMPLEX, PALDI, |
| Telephone : |
079-6589506, 6588135. 0 |
| Fax : |
91-79-6589506. |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
CORROSIONRESISTANT PTFE/TEFLON - PTFE/TEFLON COMES WITH CHEMICAL RESISTANCE AGAINST THE MOST AGGRESSIVE CHEMICALS, ACIDS AND SOLVENTS OVER A BROAD TEMPREATURE RANGE. TEFLON DOES NOT DISSOLVE NOR SWELL BY ANY SOLVENT WITHIN A NORMAL RANGE OF WORKING TEMPERATURE. AND ARE SUITABLE FOR CHEMICAL PLANTS, DUE TO THESE PROPERTIES. J V CORPORATION IS MANUFACTURER OF PTFE/TEFLON MOULDED AND MACHINED COMPONENTS. THESE INCLUDE PRODUCTS SUCH AS RODS, SHEETS, BUSHES, WASHERS, GASKET, DIAPHARAGMS, RINGS, BELLOWS, VALVE SEATS, PISTON RINGS, WEAR RINGS, PACKING RINGS, ETC. THE COMPANY CAN ALSO SUPPLY ITEMS MADE FROM DIFFERENT FILLED GRADES OF PTFE LIKE GLASS, BRONZE AND GRAPHITE, WITH SPECIFIC REQUIREMENTS AS PER DRAWINGS AND SPECIFICATION. PTFE/TEFLON HAS FREQUENTLY BEEN USED CONTINOUSLY AT 250 C AND HAS A WIDER WORKING TEMPERATURE THEN ANY OTHER PLASTIC MATERIAL AND IS VIRTUALLY UNAFFECTED BY CHEMICAL DEGRADATION UP TO ABOUT 400 C
|
|
PTFE GASKETS - GASKETS MADE OF TEFLON CUT FROM SHEETS FOR USE IN PAPER PLANTS CHEMICAL PLANTS AND PIPING SYSTEMS TEFLON PROVIDES PERMANENT SEALING MATERIAL UNAFFECTED BY HEAT AND CHEMICALS TEFLON GASKETS HAVE OPTIMAL RESILIENCY ALONG WITH NECESSARY LOAD BEARING CAPABILITY FOR RELIABLY SEALING ALMOST ANY LIQUID OR GAS THE PTEF TEFLON MOULDED AND MACHINED COMPONENTS SUCH AS RODS SHEETS BUSHES RINGS WASHERS GASKETS SEALS BALLS ROPES PISTON RINGS WEAR RINGS PACKING RINGS ETC
|
|
PTFE/TEFLON MOULDED COMPONENT - MANUFACTURED BY J V CORPORATION PTFE/TEFLON MOULDED COMPONENT ARE USED IN GLASS EQUIPMENTS BECAUSE OF THEIR EXCELLENT THERMAL AND MECHANICAL PROPERTIES. THEY HAVE NEAR UNIVERSAL FLUID COMPATIBILITY. WEAR LIFE COMPARED WITH OTHER THERMOPLASTICS IS VERY LOW. HAVING CRYOGENIC STABILITY WITH NON WETTING PROPERTY PTFE IS MAINTENANCE FREE. IT CAN WITHSTAND TEMPERATURE UP TO 250°C. THE COMPANY CAN SUPPLY ITEMS MADE FROM DIFFERENT FILLED GRADES OF PTFE LIKE CARBON, GLASS, BRONZE AND GRAPHITE. THIS MATERIAL HAS GREATER DIMENSIONAL STABILITY, BETTER WEAR RESISTANCE AND A LOWER COEFFICIENT OF THERMAL EXPANSION. IT CAN ALSO MEET SPECIFIC NEEDS AS PER DRAWINGS AND SPECIFICATIONS.
|
|
FLUOROPLASTIC/TEFLON COMPONENT - J V CORPORATION INTRODUCES COMPONENTS MADE OF FLUOROPLASTICS (PTFE/TEFLON), WHICH HAVE SOLE COMBINATION OF DIFFERENT PROPERTIES FOR END USERS. TEFLON HAS GOOD PROPERTIES SUCH AS CHEMICAL RESISTANCE COMPARED WITH METALS. IT CAN WITHSTAND CONTINUOUS SERVICE TEMPERATURE RANGE FROM -200°C TO + 250°C. THE THERMAL STABILITY OF PTFE IS UNSURPASSED BY ANY OTHER COMMERCIALLY OFFERED PLASTIC NOT EVEN BY OTHER FLUOROPOLYMERS. IT DOES NOT DISSOLVE OR SWELL BY ANY SOLVENT WITHIN NORMAL RANGE OF WORKING TEMPERATURE DUE TO ITS GREAT CHEMICAL INERTNESS. IT HAS LONG AND INDEFINITE LIFE AS ITS CHEMICAL COMPOSITION DOES NOT ALTER UNDER ANY CONDITIONS OF SERVICE. ALSO IT DOES NOT CHANGE AS A RESULT OF AGEING. THE COMPANY MANUFACTURES PTFE/TEFLON MOULDED AND MACHINED COMPONENTS SUCH AS RODS, SHEETS, BUSHES, WEAR RINGS, PACKING RINGS, RINGS, WASHERS, GASKETS, SEALS, BALLS, ROPES, PISTON RINGS, ETC. IT CAN ALSO SUPPLY TEFLON GASKETS AS PER SIZES AND DRAWINGS, WHICH ARE USED IN CHEMICAL PLANTS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
